Transform your backyard with a custom pool enclosure in Sarasota, FL.
Transform your backyard with a custom pool enclosure in Sarasota, FL. We design and build pool screening that keeps pests and debris out while letting fresh air and light in. From simple cages to high end pool screen enclosures, our installations are engineered for Florida weather and your lifestyle.
Sarasota Screening provides professional pool enclosure throughout Sarasota, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 941-676-9387 or request your free quote.
A pool enclosure is not a one‑size‑fits‑all product. Sarasota Screening starts every pool enclosure installation with a detailed on‑site evaluation of your pool deck, roof lines, landscaping, and prevailing breezes off the Gulf. We measure the deck, check slab condition, and note features like raised spas, waterfalls, and planters so the aluminum frame and screen layout fit correctly and look intentional.
Design options include classic gable cages, modern picture‑window walls with wide open views, and hip or mansard roofs that match your home’s architecture. For waterfront and golf course properties, we often recommend larger structural members and wider openings to protect views while still meeting wind load requirements. We also discuss door locations in relation to your house exits, grill, and yard paths so you are not fighting awkward traffic patterns once the enclosure is installed.
During design, Sarasota Screening reviews your HOA rules, if applicable, and typical Sarasota County zoning limits on structure height and setbacks. This avoids surprises with approvals and makes sure your pool enclosure is legal and insurable. We present a scaled drawing and a written scope of work so you know exactly what will be built before any permit is submitted.
Not all screen cages hold up the same in Sarasota’s coastal climate. Sarasota Screening primarily uses marine‑grade aluminum framing with a durable powder‑coat finish in white or bronze. The aluminum is engineered for Florida coastal environments, so it resists corrosion from salt air and constant sun exposure better than basic construction‑grade products.
For the actual screen, we offer several options based on how you use your pool. Standard 18/14 mesh fiberglass keeps out most insects and debris and is the most economical. If mosquitos and no‑see‑ums are a priority, we recommend 20/20 or no‑see‑um mesh that has tighter weave patterns specifically chosen for Gulf Coast bugs. For homes near golf courses or where kids play ball in the yard, we can install polyester or vinyl‑coated high‑strength screen that is more resistant to impact and sagging.
We also discuss extras that can make a real difference in Sarasota’s climate. Oversized gutter systems capture heavy summer downpours and direct water away from your deck. Kick plate panels protect the lower portion of the enclosure from pressure washers, pets, and lawn equipment. Where privacy is a concern, such as between closely spaced homes, we can selectively use privacy screen on side walls while keeping clear views at the rear facing your yard or water.
Sarasota Screening follows a clear, step‑by‑step process so your pool enclosure installation goes smoothly and safely. Once the design is approved, we handle the Sarasota County or City of Sarasota permit application, including engineering documents showing wind load calculations that meet current Florida Building Code. After the permit is issued, we schedule your install date around weather and any other trades working on your pool area.
On installation day, our crew secures the work area and protects your deck surface and pool from debris. If there is an existing cage, we carefully disassemble it, cap open anchor holes, and remove any hardware that could lead to rust stains. Next, we install the new base tracks using stainless or coated fasteners rated for coastal use, then set the vertical posts and roof beams according to the engineered drawings.
Once the frame is plumb and square, we add doors, hardware, and bracing, then tension and roll in the screen panels one bay at a time. Proper screen tension is critical in Sarasota’s storms, since too much slack can lead to whipping and tears, while over‑tension can overstress the frame. We clean the deck, skim the pool, and walk you through the completed enclosure so you understand door latches, pet doors if installed, and any maintenance points like gutters or access panels.
Pool enclosures in Sarasota are structural projects, not simple add‑ons. Sarasota Screening works with licensed Florida engineers who design each enclosure to comply with current Florida Building Code and local amendments, including wind speeds that typically range from 150 mph and above depending on your exact location. The engineering dictates post spacing, beam sizes, and connection methods so the structure handles storm conditions as intended.
We submit permit applications to Sarasota County or the City of Sarasota, depending on jurisdiction, along with engineered drawings and product approvals for doors and fasteners. If your home is in a coastal high‑hazard or flood zone, we make sure the enclosure footings or anchor systems are compatible with your slab and elevation requirements. For homes in deed‑restricted communities, we coordinate with HOA architectural review boards, providing color samples and elevation views that match community standards.
During construction, required inspections might include a slab or anchor inspection and a final structural inspection. We schedule these with the building department and meet the inspector on site. You do not have to manage any of these visits. Once approved, you receive documentation that your pool enclosure was installed with permits and inspections, which is increasingly important for homeowners insurance and when selling your home.
Many Sarasota homeowners ask why pool enclosure quotes can vary so much. Sarasota Screening is transparent about cost drivers so you can compare proposals fairly. The primary cost factors are size of the footprint and height of the enclosure. Taller mansard or two‑story designs require heavier aluminum, more complex bracing, and more labor than a low, simple gable over a small deck.
Screen type and frame finish also affect price. Upgrading from standard insect screen to high‑strength or no‑see‑um mesh adds material cost but can significantly extend the time between panel replacements. Bronze frames often cost more than white because of both material pricing and the way heat affects installation time under direct sun. Additional doors, pet doors, privacy walls, and oversize gutters also add to the total.
Existing site conditions can raise or lower the budget. If your deck slab is cracked, out of level, or has old anchor holes too close to proposed new anchors, we may need to epoxy anchors, install new footers, or adjust the layout. Working around raised spas, outdoor kitchens, or tight property lines can add labor. During your estimate, we point these issues out clearly and give line‑item options when possible so you can prioritize what matters most to you.
In Sarasota, we see the same pool enclosure problems over and over: rust stains from cheap hardware, doors that never close right, screens that sag within a couple of years, and frames that flex too much in a strong thunderstorm. Sarasota Screening designs and installs to avoid these problems from the start instead of patching them later.
We use corrosion‑resistant fasteners selected for coastal exposure and isolate dissimilar metals where needed to reduce galvanic corrosion. Doors are framed with proper header support and installed with adjustable hinges and quality latches that meet child safety expectations for pool barriers. We pay close attention to door swing direction so driving rain does not blow under the threshold and into your deck.
To reduce future screen blowouts, we follow engineering for bracing and do not cut corners on number of fasteners or anchor depth. We roll screens with the correct spline size to keep tension consistent in Sarasota’s heat, which constantly expands and contracts materials. When we tie the enclosure into your home, we flash and seal connections to minimize water intrusion and stains along your fascia.
For homeowners who already have issues, we can evaluate whether a partial rebuild, re‑screen, or complete replacement would be the most cost‑effective way to get your pool enclosure back to a safe, clean, and functional condition.
Before you hire anyone for pool enclosure installation in Sarasota, you should know exactly what you are getting. Ask if the company uses site‑specific engineering or reuses generic plans. Sarasota Screening always provides engineered drawings tailored to your home, which you can keep for your records. Confirm that they are pulling the permit in their name, not asking you to be the owner‑builder just to save themselves time or liability.
Request details on materials, including aluminum gauge, type of screen mesh, fastener material, and the paint or powder‑coat finish. A vague description like 'standard screen cage' is a red flag. You should also know how they handle demolition and disposal of any existing enclosure and whether deck repairs, if needed, are included or referred out.
Finally, ask about timelines and how weather delays are handled during rainy season. Sarasota Screening gives realistic start dates and explains how we protect your pool and deck if an unexpected storm hits mid‑install. We provide a written warranty that covers the structure and screen separately, and we offer ongoing maintenance and re‑screening services so you are not left searching for help years later when normal wear and tear occurs.
Professional pool enclosure installation, done right the first time, quality materials, honest pricing, and results that last.Sarasota Screening
